B W 95A mm UV IR Cut MRC 486A M Estimated Price : £ 96.56

Other product

B W 95A mm UV IR Cut MRC 486A M from B&W

Category : Camera & Photo,Accessories,Filters,Skylight & UV Filters

Boxed product Weight : 118 g
Date first available : 31 May 2013
Product Dimensions : 9 5 x 9 5 x 2 2 cm 13 6 g
Item model number : 1070172

List Price : £ 96.56

Estimated Price : £ 96.56

Buy Now

B & W 95A mm UV/IR Cut MRC (486A M)

#95Amm #UVIR #486AM Size Name strong 95mm strong This B W Interference Filter has a completely colorless glass carrier coated with a number of extremely thin partially reflecting layers with precisely computed thicknesses similar to MC coating The B W Filter 486 does not block by means of absorption but by interference of the unwanted UV and IR radiation that is repeatedly reflected between these layers affecting the wavelengths on both sides of the visible spectrum with a steep cut-off It is used mainly on digital and video cameras with CCD sensors without an integrated IR protection filter because the IR sensitivity of the CCD sensor would otherwise cause color changes and unsharpness That unsharpness results from the chromatic aberration of the lenses that are only corrected for visible light In the visible range the transmission curve is very high and straight This filter is completely clear and it requires no increase in exposure Its filter factor is 1 IMPORTANT NOTE REGARDING WIDE-ANGLE LENSES Please note however that in contrast to mass-colored integrally colored filter glass the 486M UV-IR cut filter is based on thin-film technology More than 30 interference coatings are vapor-deposited on one side while the opposite side is MRC-coated In wide-angle lenses the laws of physics lead to shallower incidence angles for peripheral rays For geometric reasons these rays have to travel further through the interference coatings than rays traveling vertically through the coatings in the center of the lens With increasing angle of incidence this leads to a change in light color towards blue This effect can clearly be seen by looking at an UV-IR barrier filter from an angle The color of the reflected light changes with a similar effect on the light traveling through the filter The filter is therefore not suitable for lens systems with an angle of view of more than 60A b Multi-Resistant Coating MRC b MRC by B W is not only an extraordinarily effective multiple layer coating it is also harder than glass so that it protects filters from scratches for instance when cleaning the filters and it is also water and dirt repellent thus facilitating filter maintenance This filter uses our standard B W F-Pro filter mount which has a front accessory thread and is made of brass Compared to the earlier standard mount introduced in 2001 the F-Pro mount has become thinner Now it can be used with wide angle lenses including most 24mm focal lengths on a full frame body without vignetting Another advantage of the F-Pro mount is it s modified retaining ring which is no longer threaded in from the front but holds the filter glass in place from the back When removing a filter or lens hood that has been screwed on too tight to the filter the retaining ring is not at risk of loosening b Other Characteristics b b Colour of product b Black b Filter size b 9 5 cm b Quantity per pack b 1 95Amm, 486AM